NEW: Get project updates onTwitterandMastodon

Securing Ingresses with Venafi

This guide walks you through how to secure a Kubernetes Ingress resource using the Venafi Issuer type.

Whilst stepping through, you will learn how to:

  • Create an EKS cluster using eksctl
  • Install cert-manager into the EKS cluster
  • Deploy nginx-ingress to expose applications running in the cluster
  • Configure a Venafi Cloud issuer
  • Configure cert-manager to secure your application traffic

While this guide focuses on EKS as a Kubernetes provisioner and Venafi as a Certificate issuer, the steps here should be generally re-usable for other Issuer types.

Prerequisites

  • An AWS account
  • kubectl installed
  • Access to a publicly registered DNS zone
  • A Venafi Cloud account and API credentials

Create an EKS cluster

If you already have a running EKS cluster you can skip this step and move onto deploying cert-manager.

eksctl is a tool that makes it easier to deploy and manage an EKS cluster.

Installation instructions for various platforms can be found in the eksctl installation instructions.

Once installed, you can create a basic cluster by running:

$ eksctl create cluster

This process may take up to 20 minutes to complete. Complete instructions on using eksctl can be found in the eksctl usage section.

Once your cluster has been created, you should verify that your cluster is running correctly by running the following command:

$ kubectl get pods --all-namespaces
NAME READY STATUS RESTARTS AGE
aws-node-8xpkp 1/1 Running 0 115s
aws-node-tflxs 1/1 Running 0 118s
coredns-694d9447b-66vlp 1/1 Running 0 23s
coredns-694d9447b-w5bg8 1/1 Running 0 23s
kube-proxy-4dvpj 1/1 Running 0 115s
kube-proxy-tpvht 1/1 Running 0 118s

You should see output similar to the above, with all pods in a Running state.

Installing cert-manager

There are no special requirements to note when installing cert-manager on EKS, so the regular running on Kubernetes guides can be used to install cert-manager.

Please walk through the installation guide and return to this step once you have validated cert-manager is deployed correctly.

Installing ingress-nginx

A Kubernetes ingress controller is designed to be the access point for HTTP and HTTPS traffic to the software running within your cluster. The ingress-nginx controller does this by providing an HTTP proxy service supported by your cloud provider's load balancer (in this case, a Network Load Balancer (NLB).

You can get more details about ingress-nginx and how it works from the documentation for ingress-nginx.

To deploy ingress-nginx using an ELB to expose the service, run the following:

Deploy the AWS specific prerequisite manifest

$ kubectl apply -f https://raw.githubusercontent.com/kubernetes/ingress-nginx/master/deploy/static/provider/aws/service-nlb.yaml

Deploy the 'generic' ingress-nginx manifest

$ kubectl apply -f https://raw.githubusercontent.com/kubernetes/ingress-nginx/master/deploy/static/mandatory.yaml

You may have to wait up to 5 minutes for all the required components in your cluster and AWS account to become ready.

You can run the following command to determine the address that Amazon has assigned to your NLB:

$ kubectl get service -n ingress-nginx
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
ingress-nginx LoadBalancer 10.100.52.175 a8c2870a5a8a311e9a9a10a2e7af57d7-6c2ec8ede48726ab.elb.eu-west-1.amazonaws.com 80:31649/TCP,443:30567/TCP 4m10s

The EXTERNAL-IP field may say <pending> for a while. This indicates the NLB is still being created. Retry the command until an EXTERNAL-IP has been provisioned.

Once the EXTERNAL-IP is available, you should run the following command to verify that traffic is being correctly routed to ingress-nginx:

$ curl http://a8c2870a5a8a311e9a9a10a2e7af57d7-6c2ec8ede48726ab.elb.eu-west-1.amazonaws.com/
<html>
<head><title>404 Not Found</title></head>
<body>
<center><h1>404 Not Found</h1></center>
<hr><center>openresty/1.15.8.1</center>
</body>
</html>

Whilst the above message would normally indicate an error (the page not being found), in this instance it indicates that traffic is being correctly routed to the ingress-nginx service.

Note: Although the AWS Application Load Balancer (ALB) is a modern load balancer offered by AWS that can can be provisioned from within EKS, at the time of writing, the alb-ingress-controller is only capable of serving sites using certificates stored in AWS Certificate Manager (ACM). Version 1.15 of Kubernetes should address multiple bug fixes for this controller and allow for TLS termination support.

Configure your DNS records

Now that our NLB has been provisioned, we should point our application's DNS records at the NLBs address.

Go into your DNS provider's console and set a CNAME record pointing to your NLB.

For the purposes of demonstration, we will assume in this guide you have created the following DNS entry:

example.com CNAME a8c2870a5a8a311e9a9a10a2e7af57d7-6c2ec8ede48726ab.elb.eu-west-1.amazonaws.com

As you progress through the rest of this tutorial, please replace example.com with your own registered domain.

Deploying a demo application

For the purposes of this demo, we provide an example deployment which is a simple "hello world" website.

First, create a new namespace that will contain your application:

$ kubectl create namespace demo
namespace/demo created

Save the following YAML into a file named demo-deployment.yaml:

apiVersion: v1
kind: Service
metadata:
name: hello-kubernetes
namespace: demo
spec:
type: ClusterIP
ports:
- port: 80
targetPort: 8080
selector:
app: hello-kubernetes
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: hello-kubernetes
namespace: demo
spec:
replicas: 2
selector:
matchLabels:
app: hello-kubernetes
template:
metadata:
labels:
app: hello-kubernetes
spec:
containers:
- name: hello-kubernetes
image: paulbouwer/hello-kubernetes:1.5
resources:
requests:
cpu: 100m
memory: 100Mi
ports:
- containerPort: 8080

Then run:

kubectl apply -n demo -f demo-deployment.yaml

Note that the Service resource we deploy is of type ClusterIP and not LoadBalancer, as we will expose and secure traffic for this service using ingress-nginx that we deployed earlier.

You should be able to see two Pods and one Service in the demo namespace:

kubectl get po,svc -n demo
NAME READY STATUS RESTARTS AGE
hello-kubernetes-66d45d6dff-m2lnr 1/1 Running 0 7s
hello-kubernetes-66d45d6dff-qt2kb 1/1 Running 0 7s
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/hello-kubernetes ClusterIP 10.100.164.58 <none> 80/TCP 7s

Note that we have not yet exposed this application to be accessible over the internet. We will expose the demo application to the internet in later steps.

Creating a Venafi Issuer resource

cert-manager supports both Venafi TPP and Venafi Cloud.

Please only follow one of the below sections according to where you want to retrieve your Certificates from.

Venafi TPP

Assuming you already have a Venafi TPP server set up properly, you can create a Venafi Issuer resource that can be used to issue certificates.

To do this, you need to make sure you have your TPP username and password.

In order for cert-manager to be able to authenticate with your Venafi TPP server and set up an Issuer resource, you'll need to create a Kubernetes Secret containing your username and password:

$ kubectl create secret generic \
venafi-tpp-secret \
--namespace=demo \
--from-literal=username='YOUR_TPP_USERNAME_HERE' \
--from-literal=password='YOUR_TPP_PASSWORD_HERE'

We must then create a Venafi Issuer resource, which represents a certificate authority within Kubernetes.

Save the following YAML into a file named venafi-issuer.yaml:

apiVersion: cert-manager.io/v1
kind: Issuer
metadata:
name: venafi-issuer
namespace: demo
spec:
venafi:
zone: "Default" # Set this to the Venafi policy zone you want to use
tpp:
url: https://venafi-tpp.example.com/vedsdk # Change this to the URL of your TPP instance
caBundle: <base64 encoded string of caBundle PEM file, or empty to use system root CAs>
credentialsRef:
name: venafi-tpp-secret

Then run:

$ kubectl apply -n demo -f venafi-issuer.yaml

When you run the following command, you should see that the Status stanza of the output shows that the Issuer is Ready (i.e. has successfully validated itself with the Venafi TPP server).

$ kubectl describe issuer -n demo venafi-issuer
Status:
Conditions:
Last Transition Time: 2019-07-17T15:46:00Z
Message: Venafi issuer started
Reason: Venafi issuer started
Status: True
Type: Ready
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Ready 14s cert-manager Verified issuer with Venafi server

Venafi Cloud

You can sign up for a Venafi Cloud account by visiting the enrollment page.

Once registered, you should fetch your API key by clicking your name in the top right of the control panel interface.

In order for cert-manager to be able to authenticate with your Venafi Cloud account and set up an Issuer resource, you'll need to create a Kubernetes Secret containing your API key:

$ kubectl create secret generic \
venafi-cloud-secret \
--namespace=demo \
--from-literal=apikey=<API_KEY>

We must then create a Venafi Issuer resource, which represents a certificate authority within Kubernetes.

Save the following YAML into a file named venafi-issuer.yaml:

apiVersion: cert-manager.io/v1
kind: Issuer
metadata:
name: venafi-issuer
namespace: demo
spec:
venafi:
zone: "Default" # Set this to the Venafi policy zone you want to use
cloud:
url: "https://api.venafi.cloud/v1"
apiTokenSecretRef:
name: venafi-cloud-secret
key: apikey

Then run:

$ kubectl apply -n demo -f venafi-issuer.yaml

When you run the following command, you should see that the Status stanza of the output shows that the Issuer is Ready (i.e. has successfully validated itself with the Venafi Cloud service).

$ kubectl describe issuer -n demo venafi-issuer
...
Status:
Conditions:
Last Transition Time: 2019-07-17T15:46:00Z
Message: Venafi issuer started
Reason: Venafi issuer started
Status: True
Type: Ready
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Ready 14s cert-manager Verified issuer with Venafi server

Request a Certificate

Now that the Issuer is configured and we have confirmed it has been set up correctly, we can begin requesting certificates which can be used by Kubernetes applications.

Full information on how to specify and request Certificate resources can be found in the Issuing certificates guide.

For now, we will create a basic X.509 Certificate that is valid for our domain, example.com:

apiVersion: cert-manager.io/v1
kind: Certificate
metadata:
name: example-com-tls
namespace: demo
spec:
secretName: example-com-tls
dnsNames:
- example.com
issuerRef:
name: venafi-issuer

Save this YAML into a file named example-com-tls.yaml and run:

$ kubectl apply -n demo -f example-com-tls.yaml

As long as you've ensured that the zone of your Venafi Cloud account (in our example, we use the "Default" zone) has been configured with a CA or contains a custom certificate, cert-manager can now take steps to populate the example-com-tls Secret with a certificate. It does this by identifying itself with Venafi Cloud using the API key, then requesting a certificate to match the specifications of the Certificate resource that we've created.

You can run kubectl describe to check the progress of your Certificate:

$ kubectl describe certificate -n demo example-com-tls
...
Status:
Conditions:
Last Transition Time: 2019-07-17T17:43:01Z
Message: Certificate is up to date and has not expired
Reason: Ready
Status: True
Type: Ready
Not After: 2019-10-15T12:00:00Z
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Issuing 33s cert-manager Requesting new certificate...
Normal GenerateKey 33s cert-manager Generated new private key
Normal Validate 33s cert-manager Validated certificate request against Venafi zone policy
Normal Requesting 33s cert-manager Requesting certificate from Venafi server...
Normal Retrieve 15s cert-manager Retrieved certificate from Venafi server
Normal CertIssued 15s cert-manager Certificate issued successfully

Once the Certificate has been issued, you should see events similar to above.

You should then be able to see the certificate has been successfully stored in the Secret resource:

$ kubectl get secret -n demo example-com-tls
NAME TYPE DATA AGE
example-com-tls kubernetes.io/tls 3 2m47s
$ kubectl get secret example-com-tls -o 'go-template={{index .data "tls.crt"}}' | \
base64 --decode | \
openssl x509 -noout -text
Certificate:
Data:
Version: 3 (0x2)
Serial Number:
0d:ce:bf:89:04:d4:41:83:f4:4c:32:66:64:fb:60:14
Signature Algorithm: sha256WithRSAEncryption
Issuer: C=US, O=DigiCert Inc, CN=DigiCert Test SHA2 Intermediate CA-1
Validity
Not Before: Jul 17 00:00:00 2019 GMT
Not After : Oct 15 12:00:00 2019 GMT
Subject: C=US, ST=California, L=Palo Alto, O=Venafi Cloud, OU=SerialNumber, CN=example.com
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
Public-Key: (2048 bit)
Modulus:
00:ad:2e:66:02:20:c9:b1:6a:00:63:70:4e:22:3c:
45:63:6e:e7:fd:4c:94:7d:75:50:22:a2:01:72:99:
9c:23:04:90:51:85:4d:47:32:e4:8b:ee:b1:ea:09:
1a:de:97:5d:31:05:a2:73:73:4f:06:a3:b2:59:ee:
bc:30:f7:26:85:3d:b3:56:e4:c2:97:34:b6:ac:6d:
65:7e:a2:4e:b4:ce:f2:0a:0a:4c:d7:32:d7:5a:18:
e8:69:c6:34:28:26:36:ef:c5:bc:ae:ba:ca:d2:46:
3f:d4:61:39:66:8f:19:cc:d6:d6:10:77:af:51:93:
1b:4d:f8:d1:10:19:ab:ac:b3:7b:0b:98:58:29:e6:
a9:ac:9f:7a:dc:63:0d:51:f5:bd:9f:f3:03:2e:b3:
2d:2f:00:87:f4:e1:cd:5a:32:c6:d8:fb:49:c4:e7:
da:3f:0f:8f:bb:66:94:28:5d:99:fe:7c:f0:17:1b:
fd:3e:ed:dd:36:bf:8e:62:60:0c:85:7f:76:74:4b:
37:d9:c2:e8:74:49:04:bf:f1:83:81:cc:4f:9b:f3:
40:97:d4:dc:b6:d3:2d:dc:73:18:93:48:a5:8f:6c:
57:7f:ec:62:c0:bc:c2:b0:e9:0a:51:2d:c4:b6:87:
68:96:87:f8:9a:86:3c:6a:f1:01:ca:57:c4:07:e7:
b0:51
Exponent: 65537 (0x10001)
X509v3 extensions:
X509v3 Authority Key Identifier:
keyid:D6:4D:F9:39:60:6C:73:C3:22:F5:AD:30:0C:2F:A0:D5:CA:75:4A:2A
X509v3 Subject Key Identifier:
A3:B3:47:2C:41:5E:9C:B2:27:97:57:14:A4:2E:BA:8C:93:E7:01:65
X509v3 Subject Alternative Name:
DNS:example.com
X509v3 Key Usage: critical
Digital Signature, Key Encipherment
X509v3 Extended Key Usage:
TLS Web Server Authentication, TLS Web Client Authentication
X509v3 CRL Distribution Points:
Full Name:
URI:http://crl3.digicert.com/DigiCertTestSHA2IntermediateCA1.crl
Full Name:
URI:http://crl4.digicert.com/DigiCertTestSHA2IntermediateCA1.crl
X509v3 Certificate Policies:
Policy: 2.16.840.1.114412.1.1
CPS: https://www.digicert.com/CPS
Authority Information Access:
OCSP - URI:http://ocsp.digicert.com
CA Issuers - URI:http://cacerts.test.digicert.com/DigiCertTestSHA2IntermediateCA1.crt
X509v3 Basic Constraints: critical
CA:FALSE
Signature Algorithm: sha256WithRSAEncryption
ae:d4:9c:8a:66:19:9e:7d:12:b7:05:c2:b6:33:b3:9c:a5:40:
47:ab:34:8d:1b:0f:51:96:de:e9:46:5a:e4:16:10:43:56:bf:
fa:f8:64:f4:cb:53:39:5b:45:ca:7f:15:d9:59:25:21:23:c4:
4d:dc:a7:f7:83:21:d2:3f:a8:0a:26:f4:ef:fa:1b:2b:7d:97:
7e:28:f3:ca:cd:b2:c4:92:f3:92:27:7f:e0:f1:ac:d6:db:4c:
10:8a:f8:6f:09:bb:b3:4f:19:06:aa:bb:74:1c:e0:51:42:f6:
8c:7d:77:f7:80:a4:03:ab:a9:ae:ae:2b:89:17:af:2f:eb:f7:
3d:61:7c:dd:e1:5d:d2:5a:c5:6a:f6:c8:92:4c:0a:b5:75:d1:
dd:39:f2:a7:a2:10:8c:6d:bf:ca:08:ad:b9:a9:df:e3:59:8f:
64:16:3c:7e:8a:6e:27:fc:49:d7:06:f0:bd:94:15:f2:fd:0f:
94:8a:b8:73:67:73:53:22:df:9d:36:e9:34:f9:2a:68:00:59:
78:6d:2d:8f:a0:0f:13:af:bd:b3:aa:8c:37:c4:22:cf:23:fb:
56:bc:4e:55:ae:3a:0a:e6:3e:b1:1a:22:71:7b:08:b8:00:41:
14:26:f6:9b:9b:72:3f:eb:dc:dd:1b:db:a8:20:fd:54:75:ae:
25:7f:80:e6

In the next step, we'll configure your application to actually use this new Certificate resource.

Exposing and securing your application

Now that we have issued a Certificate, we can expose our application using a Kubernetes Ingress resource.

Create a file named application-ingress.yaml and save the following in it, replacing example.com with your own domain name:

apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
name: frontend-ingress
namespace: demo
annotations:
kubernetes.io/ingress.class: "nginx"
spec:
tls:
- hosts:
- example.com
secretName: example-com-tls
rules:
- host: example.com
http:
paths:
- path: /
pathType: Exact
backend:
service:
name: kuard
port:
number: 80

You can then apply this resource with:

$ kubectl apply -n demo -f application-ingress.yaml

Once this has been created, you should be able to visit your application at the configured URL, here example.com!

Navigate to the address in your web browser and you should see the certificate obtained via Venafi being used to secure application traffic.